Design Of Devices Research Articles

ПРОБЛЕМЫ И МЕТОДЫ СОВЕРШЕНСТВОВАНИЯ АВТОСЦЕПНОГО УСТРОЙСТВА ГРУЗОВЫХ ВАГОНОВ С УЧЕТОМ ОСОБЕННОСТЕЙ ЭКСПЛУАТАЦИИ

The problems to operate the automatic coupling device are considered, taking into account significant changes in the operating conditions of freight cars. The operation experience of freight car automatic coupling devices of domestic railways and the United States of America is analyzed; common problematic issues are identified. Approaches to the study of modes of longitudinal-dynamic impact of cars are defined, a simplified model is given. There is a need to change the design of the automatic coupling device of freight cars by using two sequentially arranged blocks with working elements, as well as improving the properties of the working material of absorbing devices, especially in operating conditions over a wide temperature range.

Transdermal Sensing of Enzyme Biomarker Enabled by Chemo-Responsive Probe-Modified Epidermal Microneedle Patch in Human skin Tissue.

Wearable bioelectronics represents a significant breakthrough in healthcare settings, particularly in (bio)sensing which offers an alternative way to track individual health for diagnostics and therapy. However, there has been no notable improvement in the field of cancer, particularly for skin cancer. Here, we established a wearable bioelectronic patch for transdermal sensing of the melanoma biomarker, tyrosinase (Tyr), using a microneedle array integrated with a surface-bound chemo-responsive smart probe to enable target-specific electrochemical detection of Tyr directly from human skin tissue. The results presented herein demonstrated the feasibility of a transdermal microneedle sensor for direct quantification of enzyme biomarkers in an ex vivo skin model. Initial performance analysis of the transdermal microneedle sensor proved that the designed methodology could be an alternative for fast and reliable diagnosis of melanoma and the evaluation of skin moles. The innovative approach presented here might revolutionize the landscape of skin monitoring by offering a non-disruptive means for continuous surveillance and timely intervention of skin anomalies such as inflammatory skin diseases or allergies and can be extended to the screening of multiple responses of complementary biomarkers with simple modification in device design. This article is protected by copyright. All rights reserved.

Tailoring coercive fields and the Curie temperature via proximity coupling in WSe2/Fe3GeTe2 van der Waals heterostructures

Hybrid structures consisting of two-dimensional (2D) magnets and semiconductors have exhibited extensive functionalities in spintronics and opto-spintronics. In this work, we have fabricated WSe2/Fe3GeTe2 van der Waals heterostructures and investigated proximity effects on 2D magnetism. Through reflective magnetic circular dichroism, we have observed a temperature-dependent modulation of magnetic order in the heterostructure. For temperatures above 40K , WSe2-covered Fe3GeTe2 exhibits a larger coercive field than that observed in bare Fe3GeTe2, accompanied by a noticeable enhancement of the Curie temperature by 21K . This strengthening suggests an increase in magnetic anisotropy in the interfacial Fe3GeTe2 layer, which can be attributed to the spin–orbit coupling (SOC) proximity effect induced by the adjacent WSe2 layers. However, at much lower temperatures ( T<20K ), a non-monotonic modification of the coercive field is observed, showing both reduction and enhancement, which depends on the thickness of the WSe2 and Fe3GeTe2 layers. Moreover, an unconventional two-step magnetization process emerges in the heterostructure, indicating the short-range nature of SOC proximity effects. Our findings on proximity coupling may shed light on the design of future spintronic and memory devices based on 2D magnetic heterostructures.

Thermally Activated Photoluminescence Induced by Tunable Interlayer Interactions in Naturally Occurring van der Waals Superlattice SnS/TiS2.

van der Waals (vdW) superlattices, comprising different 2D materials aligned alternately by weak interlayer interactions, offer versatile structures for the fabrication of novel semiconductor devices. Despite their potential, the precise control of optoelectronic properties with interlayer interactions remains challenging. Here, we investigate the discrepancies between the SnS/TiS2 superlattice (SnTiS3) and its subsystems by comprehensive characterization and DFT calculations. The disappearance of certain Raman modes suggests that the interactions alter the SnS subsystem structure. Specifically, such structural changes transform the band structure from indirect to direct band gap, causing a strong PL emission (∼2.18 eV) in SnTiS3. In addition, the modulation of the optoelectronic properties ultimately leads to the unique phenomenon of thermally activated photoluminescence. This phenomenon is attributed to the inhibition of charge transfer induced by tunable intralayer strains. Our findings extend the understanding of the mechanism of interlayer interactions in van der Waals superlattices and provide insights into the design of high-temperature optoelectronic devices.

Ga2O3 Photon‐Controlled Diode for Sensitive DUV/X‐Ray Detection and High‐Resolution Array Imaging Application

AbstractSensitive high‐energy photon detection from UV to X‐ray and high‐resolution array imaging are critical for medical diagnosis, space exploration, and scientific research. The key challenges for high‐performance photodetector and imaging arrays are the effective material and device design strategies for the miniaturization and integration of the device. Here, photon‐controlled diodes (i.e., the detector has rectifying characteristics only under light irradiation) are proposed for high‐resolution and anti‐crosstalk array imaging applications without integrating the switching element. Based on ultra‐wide bandgap semiconductor Ga2O3, the sensitive DUV/X‐ray photon‐controlled diodes are realized by the design of high‐resistance Ga2O3 film and high‐barrier contact. The device exhibits remarkable detection performance, including high photo‐responsivity (168 A W−1) and specific detectivity (1.45 × 1015 Jones) under DUV illumination, as well as a high sensitivity (1.23 × 105 µC Gyair−1 cm−2) under X‐ray light. Moreover, the low dark current and excellent rectification characteristics are obtained. Furthermore, its potential for high‐density and anti‐crosstalk array imaging applications is verified. These results not only bring forth new insights in the implementation of high‐performance DUV/X‐ray photodetector, but also pave a feasible way to realize high pixel density detector array through the simplified fabrication process for high‐resolution imaging applications.

Regulation of monolayer MgGeN2 thin film with uniaxial and biaxial strain

Abstract The regulation of electronic and optical properties with uniaxial and biaxial strains are computationally investigated for the monolayer thin film of a newly discovered quasi-layered MgGeN$_2$ phase. It was found that, under uniaxial compression in both [100] and [010] directions with the perpendicular lattice parameter relaxable, the band gap will first increase and then decrease, while with uniaxial tensile strain the band gap monotonically decreases and the light absorption in visible range is greatly enhanced. When uniaxial compression was applied with perpendicular lattice constant fixed, the band gap behaves as the first kind of uniaxial compression and the light absorption is enhanced in visible range by compression. When biaxial strain was presented, the band gap shows a monotonic decrease from the largest compression down to the largest tensile strain, while the light absorption behaves in an opposite way. Therefore, the band structure and light absorption of monolayer MgGeN$_2$ can be efficiently tuned with strain and stress, which may be potentially used for MgGeN$_2$ film fabrication in device design and hence boost its applications in optoelectronics and photocatalysis.

A mechanical manipulated electromechanical coupling design with stretchable electret film: mechanical sensing, energy harvesting, and actuation

Abstract Electrical and mechanical energy converts around the nature, and electromechanical coupling effect is applied in various conditions such as mechanical sensing, electrical actuation, and self-powering. During the energy type conversion, electromechanical parameters are among the key issues, such as enlarging the sensitivity and range of mechanical sensing, and energy harvesting efficiency. In this work, a mechanical manipulated approach with stretchable electret is proposed to continuously manipulate the electromechanical parameters. An electromechanical coupling demonstration with pre-stretched electret films and non-contact electrodes are applied, verifying high and regulable electromechanical coupling parameters, and it is advantaged from large deformable and overload permissible capability. This mechanical manipulation approach proposes a new possibility on simplifying the structural and mechanical design of various electromechanical devices, and further enhancing the general applicability with certain geometry and material with ultra-high and tunable electromechanical coupling parameters.&amp;#xD;

A spin-torque nano-oscillator based on interlayer-coupled meron–skyrmion pairs with a fixed orbit

In recent years, magnetic skyrmion-based spin-torque nano-oscillators (STNOs) have attracted considerable interest for their prospect in future-generation communication and spintronic technologies. However, some critical issues, which hamper their practical applications, e.g., the long start-up time and variable skyrmion gyration orbit, remain to be resolved. Here, we numerically demonstrate the realization of a fixed-orbit STNO, which is based on an interlayer-coupled meron–skyrmion (MS) pair instead of a magnetic skyrmion. In this STNO, the MS pair possesses a structurally defined, fixed orbit within a broad range of driving currents, even in the presence of random defects. The output frequency range of the STNO based on an MS pair far exceeds that of the STNO typically featuring a single skyrmion. Moreover, the output frequency of this STNO can be further elevated if more MS pairs are incorporated. Our results reveal the nontrivial dynamics of the interlayer-coupled MS pair, opening perspectives for the design and optimization of fundamental spintronic devices.

Design and Parameter Optimization of Rotary Double-Insertion Device for Small Arched Insertion Machine

China’s small arched shed-building machinery suffers from a low degree of mechanization, building efficiency, and qualification rate for frame insertion. Therefore, we designed a rotary double-insertion device and established the equation for its motion trajectory. The analysis shows that in the rotary insertion process, a better point of entry into the soil exists. A simulation model was constructed in ADAMS, and the static and dynamic trajectories were analyzed. Additionally, the optimal planting and insertion speed ratios were determined. Considering the qualified rate of the insertion frame as the evaluation index to establish a regression model, we adopted a three-factor three-level experimental design and established the planting speed ratio, center distance of the planting arm, and length of the pressing rod arm as the main influencing factors. We used Design-Expert 13 to perform the analysis of variance and determined the optimal parameter combinations. The experimental results show that the planting speed ratio was 0.7, the center distance of the planting arm group was 554 mm, the length of the pressing rod arm was 923 mm, and the qualification rate of trellis planting at this time was 98.05%. The bench was adjusted and tested based on the optimal parameter combination. The average value of the measured trellis qualification rate was 96.73%, and the relative error between the test value and the theoretical optimization value was 1.32%, thereby verifying the reliability of the optimal parameter combination. Field verification test results show that the rotary double-insertion device had a planting speed ratio of 0.7 and a trellis qualified rate of 95.74% compared with the theoretical optimization value of 2.31%. Conforming to the design requirements of small arch shed-building machinery, the prototype operation performance was stable.

CMOS Scaling for the 5 nm Node and Beyond: Device, Process and Technology

After more than five decades, Moore’s Law for transistors is approaching the end of the international technology roadmap of semiconductors (ITRS). The fate of complementary metal oxide semiconductor (CMOS) architecture has become increasingly unknown. In this era, 3D transistors in the form of gate-all-around (GAA) transistors are being considered as an excellent solution to scaling down beyond the 5 nm technology node, which solves the difficulties of carrier transport in the channel region which are mainly rooted in short channel effects (SCEs). In parallel to Moore, during the last two decades, transistors with a fully depleted SOI (FDSOI) design have also been processed for low-power electronics. Among all the possible designs, there are also tunneling field-effect transistors (TFETs), which offer very low power consumption and decent electrical characteristics. This review article presents new transistor designs, along with the integration of electronics and photonics, simulation methods, and continuation of CMOS process technology to the 5 nm technology node and beyond. The content highlights the innovative methods, challenges, and difficulties in device processing and design, as well as how to apply suitable metrology techniques as a tool to find out the imperfections and lattice distortions, strain status, and composition in the device structures.

Design Approaches and Electromechanical Modeling of Conformable Piezoelectric‐Based Ultrasound Systems

AbstractPainless, needleless delivery of drugs through the skin can be realized through aphenomenon called sonophoresis by applying an ultrasound field to the biological tissue. Development of wearable embodiments of such systems demands comprehensive characterization of both the physical mechanism of sonophoresisas well as wearability parameters. Here, we present a framework for analyzing disk‐type piezoelectric transducers in a polymeric substrate to create acoustic cavitation in a fluid coupling medium for sonophoresis applications. The device design and operating parameters such as the working frequency, applied voltage range, acoustic pressure distribution, and transducer spacing were determine dusing a finite element methods (FEM),and verified with experimental measurements. The influence of the surrounding water and tank reflections on the acoustic pressure field, and the interaction between the elements in the array structure were also studied.Finally, the impact of skin and the substrate geometry on the acoustic pressure fields was characterized to simulate the invivo use‐case of the system. These analytical models can be used to guide critical parameters for device design such as the separation distance of the piezoelectric transducer from the skin boundary. We envision that this tool boxwill support rapid design iteration for realization of wearable ultrasound systems.

Perceptions of Wearable Health Tools Post the COVID-19 Emergency in Low-Income Latin Communities: Qualitative Study.

Mobile health (mHealth) wearable devices are increasingly being adopted by individuals to help manage and monitor physiological signals. However, the current state of wearables does not consider the needs of racially minoritized low-socioeconomic status (SES) communities regarding usability, accessibility, and price. This is a critical issue that necessitates immediate attention and resolution. This study's aims were 3-fold, to (1) understand how members of minoritized low-SES communities perceive current mHealth wearable devices, (2) identify the barriers and facilitators toward adoption, and (3) articulate design requirements for future wearable devices to enable equitable access for these communities. We performed semistructured interviews with low-SES Hispanic or Latine adults (N=19) from 2 metropolitan cities in the Midwest and West Coast of the United States. Participants were asked questions about how they perceive wearables, what are the current benefits and barriers toward use, and what features they would like to see in future wearable devices. Common themes were identified and analyzed through an exploratory qualitative approach. Through qualitative analysis, we identified 4 main themes. Participants' perceptions of wearable devices were strongly influenced by their COVID-19 experiences. Hence, the first theme was related to the impact of COVID-19 on the community, and how this resulted in a significant increase in interest in wearables. The second theme highlights the challenges faced in obtaining adequate health resources and how this further motivated participants' interest in health wearables. The third theme focuses on a general distrust in health care infrastructure and systems and how these challenges are motivating a need for wearables. Lastly, participants emphasized the pressing need for community-driven design of wearable technologies. The findings from this study reveal that participants from underserved communities are showing emerging interest in using health wearables due to the COVID-19 pandemic and health care access issues. Yet, the needs of these individuals have been excluded from the design and development of current devices.

Gas‐Induced Electrical and Magnetic Modulation of Two‐Dimensional Conductive Metal–Organic Framework

AbstractControlled modulation of electronic and magnetic properties in stimuli‐responsive materials provides valuable insights for the design of magnetoelectric or multiferroic devices. This paper demonstrates the modulation of electrical and magnetic properties of a semiconductive, paramagnetic metal−organic framework (MOF) Cu3(C6O6)2 with small gaseous molecules, NH3, H2S, and NO. This study merges chemiresistive and magnetic tests to reveal that the MOF undergoes simultaneous changes in electrical conductance and magnetization that are uniquely modulated by each gas. The features of response, including direction, magnitude, and kinetics, are modulated by the physicochemical properties of the gaseous molecules. This study advances the design of multifunctional materials capable of undergoing simultaneous changes in electrical and magnetic properties in response to chemical stimuli.

A Review on Underwater Collection and Transportation Equipment of Polymetallic Nodules in Deep-Sea Mining

In response to the anticipated scarcity of terrestrial land resources in the coming years, the acquisition of marine mineral resources is imperative. This paper mainly summarizes the development of underwater collection and transportation equipment of polymetallic nodules in deep-sea mining. Firstly, the collection equipment is reviewed. The deep-sea mining vehicle (DSMV), as the key equipment of the collection equipment, mainly includes the collecting device and the walking device. The micro and macro properties of sediments have a great influence on the collection efficiency of mining vehicles. For the collecting device, the optimization of the jet head structure and the solid–liquid two-phase flow transport of the hose are discussed. The structure of the walking device restricts mining efficiency. The optimization of the geometric structure is studied, and the geometric passability and lightweight design of the walking device are discussed. Secondly, the core of transportation equipment is the lifting device composed of a riser and lifting pump. In order to explore the key factors affecting mineral transport, the lifting device is summarized, and the design optimization of the lifting pump and the factors affecting the stability of the riser are discussed. Then, the relationship between each device is discussed, and the overall coupling of the device is summarized. Finally, the existing problems and future research focus are summarized.

Enhancing Mid-Infrared Surface Phonon Polariton Modes: Optimization of Structural Parameters in Nb-Doped SrTiO3 with Hole Array Structures for Advanced Infrared Sensors

Abstract This study utilized the Finite Difference Time Domain (FDTD) method to investigate the mid infrared surface phonon polarity (SPhPs) and localized surface phonon resonance (LSPhRs) in undoped and niobium (Nb)-doped SrTiO3 (STO) with planar and hole array structures. Research has shown that Nb-doped STO operates in the Reststrahlen band of 8.06-18.48 µm, providing a wider spectral response than undoped STO (12.58-18.26 µm) and effectively covering the atmospheric window of long wave infrared. This indicates that the increase in virtual permittivity has the least impact on spectral broadening, indicating that the new infrared sensor technology has broad prospects. The optimization of structural parameters, including the period, filling factor, and depth of STO hole arrays, as well as the response to changes in incident light angle, is crucial for guiding the design of high-performance optoelectronic devices. In addition, this study explored the excitation of four resonant modes within a hole array and analysed their relationship with array parameters to enhance the design of optoelectronic applications.

Physical insight into turn‐on transient of silicon carbide gate turn‐off thyristor

AbstractSilicon Carbide (SiC) Gate Turn‐off (GTO) thyristor is regarded as a promising option for pulsed power applications; however, the formation of high di/dt has been constrained by the slow current rise transient phase and the turn‐on current heterogeneity over the chip device. In this paper, a practical integrated multi‐cell simulation is performed to physically characterize the turn‐on transient of SiC GTO thyristor. Through examining electrical coupling between adjacent cells caused by both parasitics of electrode metallization and carrier travelling via SiC, the current distributions are observed, and the carrier transport dynamics are analyzed in detail. Furthermore, physical mechanisms dominating the current heterogeneity among multi‐cells are discovered in depth. It is revealed that the current heterogeneity during the turn‐on transient is primarily resulted from the Gate signal delay caused by the Gate Runner metallization, and the lateral interaction from adjacent semiconductor regions adds to this inhomogeneity; however, this situation can be improved once the electrical distance between each Anode contact and the Anode electrode gets lowered. Design method for turn‐on performance improvement is also proposed accordingly. Besides, based on the analysis conducted on the multi‐cell simulation results, the possible reason of the extremely slow current rise transient phase is speculated and experimentally verified. The improvement in the comprehension of SiC GTO's turn‐on transient, which cannot be obtained from the traditional investigation from the viewpoint of one elementary cell, will provide guiding principles helping in directing future efforts to advance the improvement of device design technology.

Standard series of transmitting equipment for hydra-jet technology based on dimensionless geometric parameters development

Introduction. The work is devoted to the calculation of series standards for the design of high-pressure transmission devices used in various hydra jet technologies, which will provide the design of these devices based on dimensionless indicators describing the relationship between their geometric and technological parameters.Materials and methods. The methodology includes the use of mathematical models and analytical approaches to assess the influence of various parameters on heat generation processes in equipment, as well as methods for statistical processing of results.Results. A histogram of temperature distribution was constructed and the data was approximated using the distribution curve of temperature values and parametric series were generated for dimensionless parameters depending on various factors such as temperature, pressure, rotational speed and linear speed. It is possible to obtain parametric series for linear dimensions from five temperature ranges and seven standard sizes depending on the pressure and rotation speed of the drill shaft.Discussion and conclusions. The results obtained provide a better definition of the relationships between rotation speed, geometric characteristics and temperature parameters through the use of dimensionless indicators and it is possible to optimize the design of such devices taking into account operating conditions and ensuring increased efficiency.

Size, shape, and dimension effects on the melting temperature of metallic nanocrystals

Melting is the most common phenomenon in nature and one of the most important properties of metallic materials. Exploring the size D, shape α, and dimension d effects on the melting temperature T m of nanocrystals is of great significance for the design, fabrication, and application of quantum devices. In this work, by redefining the critical diameter D 0 and introducing shape factor α, a unified model without any adjustable parameters has been developed to describe the T m(D, α, d) function. The model is compared with the available experimental and simulation data of Cu, Pd, In, Pb, Au, Ag, and Ni nanocrystals and other theoretical works, and a consistent agreement is obtained, which verifies the accuracy of the prediction. This model is also compared with other theoretical works, and we find that it agrees well with Lu’s model, while the BOLS method underestimates the melting point. This work not only gives a new perspective on the relationship between size, shape, dimension, and melting temperature but also provides theoretical guidance for the design and optimization of low-dimensional quantum devices.

Underground Ink: Printed Electronics Enabling Electrochemical Sensing in Soil

Improving agricultural production relies on the decisions and actions of farmers and land managers, highlighting the importance of efficient soil monitoring techniques for better resource management and reduced environmental impacts. Despite considerable advancements in soil sensors, their traditional bulky counterparts cause difficulty in widespread adoption and large-scale deployment. Printed electronics emerge as a promising technology, offering flexibility in device design, cost-effectiveness for mass production, and a compact footprint suitable for versatile deployment platforms. This review overviews how printed sensors are used in monitoring soil parameters through electrochemical sensing mechanisms, enabling direct measurement of nutrients, moisture content, pH value, and others. Notably, printed sensors address scalability and cost concerns in fabrication, making them suitable for deployment across large crop fields. Additionally, seamlessly integrating printed sensors with printed antenna units or traditional integrated circuits can facilitate comprehensive functionality for real-time data collection and communication. This real-time information empowers informed decision-making, optimizes resource management, and enhances crop yield. This review aims to provide a comprehensive overview of recent work related to printed electrochemical soil sensors, ultimately providing insight into future research directions that can enable widespread adoption of precision agriculture technologies.

Design and Fabrication of a Simple Device for Folding Towel

Electronic technology makes work more manageable, and various electronic gadgets have been invented to assist humans. One of the most time-consuming activities is household chores, such as laundry. Daily laundry tasks are easier to manage with the help of washing and drying machines. However, the folding task is still done by hand and is not automated. A towel is one of the main clothes in daily life. Commonly, people use bare hands to fold the towel. However, this task consumes much time and energy; consequently, boredom, tiredness, and fatigue occur. The existing device to fold towels usually has a large physical compartment and is mainly used for industrial purposes, such as at hotels or laundry shops. The towel-folding machine is in increasing demand in our daily lives. Therefore, this project was developed and designed to eliminate the tedious folding of towels. The main aim is to design and develop an effective mechanism for folding rectangular towels using electronic components. The other objective is to compare the timing of folding rectangular towels using a simple device and by hand. As a result, the prototype represented a semi-automation system incorporating mechanical and electronic designs. The prototype assembly has a folding board made from polypropylene plastic. The amount of time to fold one towel using a semi-automatic folding board remains the same throughout the process, while the amount of time required to fold towels by hand increases. In conclusion, a prototype was designed and developed successfully with various electronic components: HC-SR04 ultrasonic sensor, MG996R servomotor and Arduino. Besides, by comparing the timing of folding rectangular towels using a simple device and by hand, 94 seconds was reduced when folding 50 sheets with the aid of the device, compared to by hand. In other words, the effectiveness of the device is 20%.